2025 Factory Cat GTX v2 Ride On Floor Base

Information

2025 Factory Cat GTX v2 Ride On Floor

If you are looking for a battery powered ride-on floor scrubber for cleaning large spaces quickly, the XR v2 is built for the task. With large solution and recovery tanks, wide scrub path, and dual vacuum motors standard, this ride-on auto scrubber can clean large facilities, fast!

Features may include:
  • Up to 280,000 sqft/Charge
  • 46 / 49 Gallons
  • 29 - 37 inch decks

Photos

Highlights

  • 15 States, Across US
  • 2025
  • Factory Cat
  • GTX v2 Ride On Floor Base
  • Available
  • 43" | Width: 34" (86 cm)
  • 59"

    • Specifications

    • 2025
    • Factory Cat
    • GTX v2 Ride On Floor
    • Base
    • General
    • Power: 3.0 hp - All Gear / Sealed (2,237 watts)
    • (2×) 14'' × 5'' ([2×] 36 × 12 cm) - Solid Black
    • Front: 12'' × 4'' (30 × 10 cm) - Solid Black
    • Disk: (2×) 1.5 hp 350 rpm ([2×] 746 watts) | Voltage/Amps: 36 VDC / 315 ah WET
    • Disk Brush: 350 rpm | Cylindrical Brush: (2×) 1.5 hp 350 rpm ([2×] 1,118 watts) | Forward: 0 - 320 ft/min / 0 - 3.6 mph (0 - 98 m/min / 0 - 6 km/h) | Scrubbing: 0 - 256 ft/min / 0 - 2.9 mph (0 - 78 m/min / 0 - 5 km/h) | Reverse: 0 - 230 ft/min / 0 - 2.6 mph (0 - 70 m/min / 0 - 4 km/h)
    • Productivity - Theoretical: Up to 49,587 sqft/hr (4,607 sqm) | Productivity - Practical: Up to 22,989 sqft/hr (2,136 sqm)
    • Run Time: Up to 5.0 Hours
    • Vacuum Power (Water Lift / Airflow): (2x) 1.0 hp / 2 Stage / 6.6’’ (551watts) 73'' / 96 cfm (186 cm / 2.7 cm/m))
    • Brush Dow: Up to 300 lbs (113 kg) | Actuator Ratin: 1200 lbs (227 kg)
    • Solution Flow / Filter: 0 - 1.0 GPM / Stainless Inline (0 - 3.7 LPM
    • Decibels: 63 dBA / ECON 61 dBA
    • Disk: 40'' - (2×) 20'' ,45'' - (2×) 23''| Cylindrical: 40'' - (2×) 7'' x 38'' , 46'' - (2×) 7'' x 44''
    • 59"
    • 77" | Broom: 26"
    • 43" | Width: 34" (86 cm)
    • (w/out batteries): 1,200 lbs - 1,250 lbs | (w/ batteries): 1,925 - 1,975 lbs
    • Drain Saver: 30 cubic inches (2,130 cubic cm)
    • 3/16'' Steel (4.8 mm) Powder Coated