2024 Factory Cat GTX v2 Base

Information

2024 Factory Cat GTX v2

Compact floor scrubbers are used everywhere there are medium and large spaces to clean. Many machines in the compact ride on scrubber market are light duty and majority plastic, lasting only 3 – 5 years. The GTX v2 sit atop our signature welded steel frame assuring many years of service and durability. Equipped with simple controls virtually anyone can operate this machine with minimal training.

Photos

Highlights

  • 15 States, Across US
  • 2024
  • Factory Cat
  • GTX v2 Base
  • Available
  • 34" | Width: 34" (86 cm)
  • 64"

    • Specifications

    • 2024
    • Factory Cat
    • GTX v2
    • Base
    • General
    • Power: 0.75 hp - All Gear / Sealed (559 watts)
    • (2×) 12'' × 3'' ([2×] 30 × 7 cm) - Solid Black
    • Front: 10'' × 3'' (25 × 7 cm) - Solid Blac
    • Disk: (2×) 0.75 hp ([2×] 551 watts | Cylindrical Motor: (2×) 0.75 hp ([2×] 551 watts) | 36 VDC / 210 ah WET
    • Disk Brush: 270 rpm | Cylindrical Brush: 650 rpm Standard | Orbital Motor: 1.2 hp (882 watts) 2,500 rpm | Forward: 0 - 320 ft/min / 0 - 3.6 mph | Scrubbing: 0 - 256 ft/min / 0 - 2.9 mph | Reverse: 0 - 230 ft/min / 0 - 2.6 mph
    • Productivity - Theoretical: Based off of ISSA 2010 Cleaning Times Up to 47,000 sqft/hr (4,366 sqm) | Productivity - Practical: Based off of ISSA 2010 Cleaning Times Up to 21,661 sqft/h
    • Run Time: Up to 6 Hours
    • Vacuum Power (Water Lift / Airflow): 1.0 hp / 2 Stage / 6.6'' (551watts) 73'' / 96 cfm (185 cm / 2.7 cm/m)
    • Brush Dow: Up to 200 lbs (90 kg) | Actuator Ratin: 500 lbs (227 kg)
    • Solution Flow / Filter: 0 - 0.7 GPM / Stainless Inline (0 - 2 LPM)
    • Disk: 26'' - (2×) 13, 28'' - (2×) 14', 30'' - (2×) 15", 34'' - (2×) 17 | Cylindrical: 25'' - (2×) 6'' x 23', 29'' - (2×) 6'' x 27" , 33'' - (2×) 6'' x 31"28'' × 14'' (71 × 35 cm), 32'' × 14'' (81 × 35 cm) | Orbital:
    • 64"
    • 66" | Broom: 26"
    • 34" | Width: 34" (86 cm)
    • (w/out batteries): 725 lbs - 850 lbs (328 - 385 kg) | (w/ batteries): 1,195 - 1,325 lbs (542 - 601 kg)
    • Drain Saver: 130 cubic inches (2,130 cubic cm)
    • 3/16'' Steel (4.8 mm) Powder Coated