2025 Hoist Liftruck Lazer Series 15,000-40,000 lbs.

Information

2025 Hoist Liftruck Lazer Series 15,000-40,000 lbs.

Lazer Series Go_Green_Button_White

The Lazer Series offers the same combination of strength, maneuverability and comfort as the Titan and FKS series, but on an electric platform. Operating in the harshest indoor applications, these battery-powered cushion tire lift trucks have zero emissions and offer a wide array of mast and attachment configurations.

Designed for indoor applications, the Lazer Series is ideal for a variety of industries, including paper, steel, beverage and automotive. Whether you’re stacking large paper rolls or moving metal coils inside a railcar, the Lazer Series provides the strength and maneuverability you need to maximize productivity.

As with all Hoist Material Handling equipment, the Lazer Series is forged in the USA. More than 75% of each truck is manufactured in-house at our Midwest factory with the remaining components sourced from reputable U.S. companies.

Features may include:

For maximum performance an operator must have all the essential tools around them. The Lazer Series is designed with advanced ergonomics and safety features for maximum comfort and protection.

  • Meets ANSI B56.1 FOPS operator protection
  • Overhead guard provides safety without obstructing views
  • Low, non-skid steps for safe and easy entry/exit
  • Soft-touch hydraulic levers require minimum effort
  • Tilt-steering column with directional/gear-shift lever
  • Dual brake pedal and inching control
  • Spring-apply/hydraulic-release parking brake
  • Gauges and auxiliary controls on front console for easy viewing and access
  • Emergency stop button
  • Adjustable semi-suspension seat and retractable seat belts
  • Integral clipboard and beverage holder

The Lazer Series is designed with a standard two-stage, high-visibility mast, low-profile carriage and short counterweight to provide the operator with unobstructed views in all directions.

For ultimate versatility and efficiency, equip your Lazer Series with our new Quick-Change System. This optional feature allows crews to switch from forks to a coil ram in minutes without removing the pin.

  • Pin-mount, machine-contoured forks (high or low position)
  • Welded-nested channels with lift cylinders secured directly behind mast rails
  • Lift chain and optional attachment hosing located inside inner mast rail
  • Main and side thrust rollers are impact-resistant and designed to reduce friction; rollers are properly lubricated and sealed
  • Greaseable mast pivots constructed with wear-resistant bronze bushings and hardened steel pins
  • Safety valves built into base of lift cylinders for controlled lowering in the event of a hose failure
  • Chrome-plated rods on cylinders for easy seal replacement

Photos

Highlights

  • 15 States, Across US
  • 2025
  • Hoist Liftruck
  • Lazer Series 15,000-40,000 lbs.
  • Available

    • Specifications

    • 2025
    • Hoist Liftruck
    • Lazer Series
    • 15,000-40,000 lbs.
    • Cushion Tire
    • 17.7HP
    • Drive
    • Battery compartment accommodates 72- or 80-volt battery
    • Standard 12-volt electrical system
    • Hydraulic pump motor features load-sensing hydraulic system with variable pumps adjust oil flow accordingly to provide quicker lifting cycles
    • Hydraulic multi-gauge provides quick and easy pressure readings with a twist of the dial; eliminates the need to tap into hydraulic lines
    • Electrical system controls LED headlights, tail lights, turn signals, backup lights, marker lights, brake lights and LED amber strobe light; lights are completely sealed and last approximately 10,000 hours
    • Load Center: 24 – 36 in. (900 – 1,200 mm)
    • 75 – 92 in. (1,900– 2,300 mm)
    • 15,000 – 40,000 lbs. (7 – 18 tonnes)
    • Polyurethane slides and roller options allow quick battery installation and removal | Transistor control monitors drive and pump motors, travel speed, hydraulic functions and battery life | Low battery lift interrupt protects electrical system and motors from low voltage damage | 12-plate modulation for smooth shifting and added durability | Tilt-lock valve with counterbalance to prevent mast drift | Color-coded electrical wires enclosed with split-tubing wire loom wrap using sealed weather pack connectors | Planetary drive axle rated for durability in high-capacity, off-road applications | Force-cooled outboard wet disc actuated brakes reduces premature wear, extending life of brakes | Brakes can be serviced through the wheel ends without removing entire drive axle | Drive axle is bolted and dowel-pinned in the chassis | Thick top plate on welded beam steer axle provides added strength and durability | Highly maneuverable in tight areas | Lower maintenance costs due to minimal amount of moving parts | Easy-access lubrication points | Sealed tapered roller bearings | High-impact greaseable composite trunnions | Two-part rust-inhibiting polyurethane base coat and two-part polyurethane top coat for corrosion protection | Majority of components are powder-coated, which is up to 10 times thicker than traditional spray paint resulting in greater scratch and chip resistance | Environmentally friendly; produces virtually no volatile organic compounds (VOCs)
    • Dual-action bolt on cylinder is protected by heavy steel support beams and provides effortless power steering