2024 Landoll B40AC-HL / B50AC-HL Forklift B50AC-HL

Information

2024 Landoll B40AC-HL / B50AC-HL Forklift B50AC-HL

HIGH LIFT

The Bendi B40AC-HL and B50AC-HL forklifts work in aisles as narrow as 78" (1.98M), have a starting capacity of 4,400 lbs (1996 kg) at 24" (600mm) load center and lift heights available to 41' (12.50M).

They are a 4-wheel articulating forklift with dual independently driven rear-drive tires and soft-poly front load tires. The Bendi B40AC-HL and B50AC-HL can work inside and outside on paved surfaces and have a floating front axle allowing the trucks to ride smoothly over uneven floors. They can do the same jobs as reach and counterbalanced trucks but in much narrower aisles.

EXCEPTIONAL PERFORMANCE AND MANEUVERABILITY

Equipped with the Landoll DuraSteerTM front wheel hydraulic steering, the B40AC-HL/B50AC-HL provides exceptional control and makes load placement and retrieval superior to the competition.

3-STAGE MAST

The new mast has a rigid mounting and as standard a tilting and side shifting carriage. The new design offers increased mast rigidity, capacity and improved visibility. Dual free lift cylinders and optimized hose and chain routings have improved visibility thru the mast. Lowered heights have been reduced and a new mounting position on the 42” (1067 mm) wide front axle reduces the distance from the face of the forks to the back of the axle thereby improving aisle performance.

Features may include:

  • 4,400 lb. (1,996kg) and 5,000 lb. (2,268kg) Capacity at 24" (600mm) Load Center
  • Four-Wheel Design, Dual Rear Wheel Drive
  • Adjustable Seat and Steering Wheel
  • Integral 11.2" (285mm) Stroke Sideshifter and 36" (914mm) High Load Backrest
  • DuraSteerTM Front Wheel Hydraulic Steering Provides Smooth, Reliable, Long-Lasting Steering Control
  • Creep Speed Mode Adds Enhanced Control when Handling Loads at High Elevations or While Training Operators
  • High Visibility Mast Allows Optimum Safety and Control
  • Independently Controlled Rear Wheels Allow Independent Speed Control of Each Drive Tire Based on Steering Angle
  • AC Traction and Hydraulic Motors Ensure Minimal Maintenance and High Efficiency
  • High-Efficiency Curtis AC Controllers Provide Trouble Free Operation
  • Interactive LCD Status Monitor (BDI with Lift Interrupt, Hour Meter with Service Monitor, Diagnostic Code Display, Input Device Calibration)
  • 48 Volt Electrical System

Photos

Highlights

  • 15 States, Across US
  • 2024
  • Landoll
  • B40AC-HL / B50AC-HL Forklift B50AC-HL
  • Available
  • Chassis: 54 in (1,372 mm) | Front Axle: 44 in (1,118 mm)
  • Cab Floor: 31.3 in (795 mm) | Overhead Guard: 89 in (2,261 mm) | Battery Compartment: 19.24 in (489 mm)

    • Specifications

    • 2024
    • Landoll
    • B40AC-HL / B50AC-HL Forklift
    • B50AC-HL
    • General
    • Hydraulic Motor Rating - Continuous Duty: 12 kW | Drive Motor Rating - Continuous Duty: 2 x 7.5 15 Total kW
    • Front (1 each): 15x6 in (381x152 mm) | Rear (2 each): 18x9 in (457x229 mm)
    • Travel - Loaded: 6.5 mph (10.5 kph) / Unloaded: 7 mph (11.3 kph) | Lift - Loaded: 90 fpm (27.4 mpm) / Unloaded: 110 fpm (33.4 mpm) | Lowering - Loaded: 100 fpm (30.5 mpm) / Unloaded: 90 fpm (27.4 mpm)
    • Gradeability Unloaded: 15% / Loaded: 15%
    • Load Center: 24 in (610 mm) | Fork Tilt - Fwd / Back: 0 / 3 deg | Lost Load Center: 12.5 in (318 mm) | Rear Overhang: 31.5 in (800 mm) | Underclearance: 3 in (76 mm) | Front Articulation: 180 deg
    • 73 in (1,854 mm)
    • To Face of Forks: 117 in (2,972 mm)
    • Cab Floor: 31.3 in (795 mm) | Overhead Guard: 89 in (2,261 mm) | Battery Compartment: 19.24 in (489 mm)
    • 52 in (1,321 mm)
    • Chassis: 54 in (1,372 mm) | Front Axle: 44 in (1,118 mm)
    • Fork: 40 in (1,016 mm)
    • 5,000 lb (2,268 kg)
    • With Battery: 19,340 lb (8,772 kg)