Equipment Depot

Information

2026 Landoll 317 Series 317E-50CA

THE 317 WORKHORSE

The 317 35-ton capacity trailer features a one-piece, 4-beam frame designed with a low-load angle and a 29” full width, rigid flat approach plate.  Landoll’s full-tilt trailer gives the operator full control of the trailer and heavy loads.  The 317 features a rigid frame that lifts up from the fifth wheel.  The 317 is nicknamed the OLD WORKHORSE because of its decades of dependable performance and durability.

In-house designed and fabricated steel beams, incorporated with high tensile strength Jr. I-Beam cross members provide unsurpassed strength while offering substantial weight savings.  The undercarriage roller bearings lower the deck into patented reinforced pockets, lowering the deck height and preventing frame twist.  Whether the load is a heavy fork lift or a loaded container, the 317 can do it all.

The 317 comes equipped with standard centralized grease, Grote annealed marker lights, Grote “Xtreme” wire harnesses and durable powder coat paint.  Popular options include Container Chain Drive, Dual Winches and Dock Level Hydraulics to level the trailer to dock height.

Features may include

• Capacity* 70,000 lbs.

• Deck Rating 50,000 lbs. in 10'

• Main Frame Fabricated 80,000 PSI Yield, Four Beam Design

• Width 102"

• Loaded Deck Height 38"

• Loaded Ground Clearance 20"

• Decking 1-3/8" Apitong Hardwood

• Slope Drop 45°

• Load Angle 8.5°

• Crossmembers Alternating with 4" and 3" Junior I-Beam on 8" Centers

• Hitch 2" Kingpin

• Pin Setting 24"

• Swing Clearance 70-1/2"

• Tool Box Twin Side Mounted in Upper Deck with Lockable Doors (7”H x 34”W x 29” D)

• Tie Downs Double Keyhole Chain Slots and Stake Pockets

• Parking Stands Two Speed Landing Gear

• Approach Plate Flat Approach with (6) Keyhole Tie Downs

• Suspension Air Ride RLU228, 22,500 lb. Capacity

• Undercarriage (1) 4" x 126" and (2) 4" x 42" Cylinders; Powder Coated Black

• Grease Centralized Grease System

• Axles (2) 25,000 lb. Axles, Dual Tire, Oil Bath Bearings, Automatic Slack Adjusters

• Brakes 12.25×7.5 Full Air / Spring Brakes, ABS 4S2M

• Tires 235/75R 17.5 LRJ Double Coin Tires

• Rims 17.5×6.75 Tubeless Rims

• Wheels Hub Pilot / Steel with Outboard Brake Drums

• Oil Seal Hubs Internal Mated Assembly